Capalex Aluminium Extrusions

 

6063 Alloy Data Sheet

            Mechanical Properties
Forming Machining Welding Brazing/Soldering Protective Anodising Aesthetic Anodising Temper Restrict Min N/mm Stress Min N/mm
Good Good Good Good Good Good 0
F
T4
T5
T6
 -
-
70
110
160		 140max
-
130
150
195

 

Chemical Composition EN AW-6063(A)
Si 0.2-0.6
Fe 0.35
Cu 0.1
Mn 0.1
Mg 0.45-0.9
Cr 0.1
Zn 0.1
Ti 0.1

(The chemical composition of aluminium and aluminium alloys is supplied in percentage by mass. Limits are expressed as a maximum unless shown as a range or a minimum)

Aluminium alloy 6063 is a medium strength alloy. Often referred to as an architectural alloy.

Applications

Aluminium alloy 6063 is typically used in commercial and is highly suitable for anodising.

* Properties given are typical and should only be used for comparisons of alloys. Actual values will depend on section specification.

** Aerospace materials are covered by the ‘L’ series of British standards.

Note: Whilst every effort is made to ensure the accuracy of data provided, Capalex does not guarantee or accept liability for its accuracy.